LE_Amdt_A_YYYY_NN_AIP_DS_FULL_Obstacles_ADHP_Metadata
eng
dataset
AIS-Spain (ENAIRE)
+34 913 213 363
Avda. Aragon, 330. Edificio 2 - P.E. Las Mercedes
Madrid
Madrid
28022
Spain
mailto: ais@enaire.es
https://aip.enaire.es
publisher
2021-06-28
ISO 19115
ISO19115:2003/Cor 1 2006
https://aip.enaire.es
geometryOnly
point
EPSG:4326
Aerodrome/Heliport obstacles
2021-06-28
creation
documentDigital
Obstacle datasets
Detailed description of aerodrome/heliport obstacles in the areas stated in AIP AD 2.10 or AIP AD 3.10
Obstacle data are intended to be used in the following air navigation applications:
a) ground proximity warning system with forward looking terrain avoidance function and minimum safe altitude warning system;
b) determination of contingency procedures for use in the event of an emergency during a missed approach or take-off;
c) aircraft operating limitations analysis;
d) instrument procedure design (including circling procedure);
e) determination of en-route “drift-down” procedure and en-route emergency landing location;
f) advanced surface movement guidance and control system; and
g) aeronautical chart production and on-board databases.
The data may also be used in other applications such as flight simulator and synthetic vision systems, and may assist in determining the height restriction or removal of obstacles that pose a hazard to air navigation.
Airport/heliport operators
completed
AIS-Spain (ENAIRE)
+34 913 213 363
Avda. Aragon, 330. Edificio 2 - P.E. Las Mercedes
Madrid
Madrid
28022
Spain
mailto: ais@enaire.es
https://aip.enaire.es
pointOfContact
XML
AIXM5.1
Obstacle
vector
spa
eng
XML
AIXM5.1
AIS-Spain (ENAIRE)
+34 913 213 363
Avda. Aragon, 330. Edificio 2 - P.E. Las Mercedes
Madrid
Madrid
28022
Spain
mailto: ais@enaire.es
https://aip.enaire.es
distributor
dataset
Entire territory of Spain
Obstacle data are obtained from the airport operator as an excel file.
The obstacles are automatically imported into a GIS database and from there exported into XML format for distribution.
The datasets include metadata which allow the degree of compliance with the numerical requirements set out in Annex 15 of ICAO to be evaluated.
These metadata should be used in order to determine if the products are fit for their intended use.